Today, I'm officially announcing the Corginator 9000 Lite the :corgi: shaped arduino board, designed and built by myself and @zhangxieshi369. As some of you may have seen(you have probably heard about it, and you've probably seen my renders and actual boards, which I've posted in various channels.) The corginator 9000s recently arrived, and I've finished assembling 3. (You might see a small wire- that's intentional, not by design, but because a small engineering mishap caused me to need to connect a capacitor for USB to function properly, but the problem has been fixed and the wire won't be present in the next batch 🙂) To give a quick run down: The corginator 9000 lite, is based off the ATmega328P,(the same chip used in arduino UNOs) from Atmel(Now part of microchip) The board has analog input, digital input and output, 3.3/5V operation, and more. The specs are: 32K Flash, and 2K RAM, and a 16MHz clock. Reset button and ICSP button for various stuff, and well, an arduino Nano pinout. The board has a onboard CH340C for USB bridge, preventing a need for an external USB adapter. The D13 LED is wired directly to the eye's LED. This means that you can program that LED to blink, flash, and do whatever you want. This board is pre-flashed with the Arduino Bootloader. It's 100% compatible with Arduino IDE. The board will also soon hopefully be available for sale on the Hack Shop. And with that, I present to you: The first 3 assembled and tested Corginator 9000s: